Build Your Custom Panga — Panga Boats USA

Back

Hull

Build request sent

Thanks — our Cape Coral crew has your ticket. We’ll follow up by email, usually within one business day.

Back to site

Motor:

Choose Your Hull

Eight Yamaha Imemsa hulls. Lock the one you want us to start from — the rest of the spec follows this choice.

Standard Rail

Open gunwale — lighter, more reach over the side

Hull locked

W-16

The Lightweight Backwater Skiff

15.96′

LOA

9.9–25 single

Engine

992

Cap.

Hull locked

W-22

The All-Around Coastal Workhorse

21.98′

LOA

40–75 single

Engine

2,425

Cap.

Hull locked

W-25

The Offshore-Ready Fishing Platform

Popular

25.08′

LOA

60–115 single

Engine

2,646

Cap.

Hull locked

W-29

The Commercial-Grade Offshore Panga

28.87′

LOA

115–250 / 90–250 twin

Engine

5,511

Cap.

Hull locked

W-33

The Largest Deep-Sea Panga

32.71′

LOA

115–250 / 115–300 twin

Engine

6,615

Cap.

High Rail / B/A

Raised freeboard — dryer ride, more offshore confidence

High Rail Hull locked

W-22 B/A

High-Rail Inshore Performer

22.11′

LOA

40–75 single

Engine

2,425

Cap.

High Rail Hull locked

W-25 B/A

High-Speed Offshore Panga

25.13′

LOA

60–115 single

Engine

2,646

Cap.

High Rail Hull locked

W-267 B/A

The Wide-Body Twin-Engine Panga

Twin OK

26.04′

LOA

100–200 / 40–90 twin

Engine

3,181

Cap.

Need full specs first? Compare all models →

Choose Your Motor

Select your Yamaha outboard horsepower. Options shown are rated for your hull.

Lock a hull first

Return to Step 1 and select your hull to see available motor options.

Engine Configuration

Single Outboard Twin Outboards

Select Horsepower

Select Horsepower (per engine)

Pricing Note

Motor pricing is quoted separately from the hull. We'll include current Yamaha pricing for your selection when we send your build quote.

Standard Packages (Included)

These packages are part of every Panga Boats USA build. You don’t pick or pay for them separately — they’re built into the base spec.

Navigation Package

Essential safety and electrical equipment required for legal operation on U.S. waters.

› Navigation lights
› Auto bilge
› Fire extinguisher
› Electronic horn

Console Package

Fiberglass helm console with mechanical steering — the foundation of your helm station.

› Fiberglass console
› Mechanical steering
› Floor boot

Gauge Package

Yamaha instrumentation and electrical panel for full engine monitoring and switched accessory control.

› Yamaha tachometer with harness
› Fuel gauge
› 6-position fuse panel
› 4-position illuminated switch panel

Rigging Package

Everything needed to connect your Yamaha outboard to the helm — controls, cables, wiring, ignition, and a marine battery.

› Side-mount Yamaha control
› Control cables
› Engine harness
› Key switch
› 24-series Decka marine battery with hold-down

Floor Package

Fiberglass molded flooring with non-skid texture — a clean, durable surface that protects the hull and your footing.

› Fiberglass molded floor with non-skid texture

Note on Outboard

Your motor selection from Step 2 is quoted separately from the hull price. We'll include current Yamaha pricing in your build quote.

Select Options (0 on the ticket)

Standard equipment below is included on every build. Tap add-on upgrades you want; each one lands on the work order above.

Included on every build

Standard Equipment

No extra charge

Leaning Post

Helm leaning post with flip-up seat and storage bag, included on every build for standing and seated helm comfort.

Swing Down Step

Transom swim platform with stainless grab rail and swing-down boarding step for easier water access.

Backrest

Padded lean-post backrest at the helm for support on long runs and slow trolling.

Bimini, T-Top & Shade Baitwell Seating & Cushions Leaning Post Accessories Console Accessories Additional Options

Bimini, T-Top & Shade (0)

Deluxe 8' Bimini Top 316 stainless steel frame with Sunbrella fabric for long-lasting UV and weather resistance.

Deluxe 42" x 7' T-Top Full overhead shade and a rigid mounting platform for electronics, lights, and outriggers.

T-Top Electronics Box Lockable storage box mounted to the T-top for protecting VHF radios, chartplotters, and accessories.

Rod Holders Welded to T-Top or Leaning Post Stainless-welded flush rod holders integrated directly into the T-top frame or leaning post.

T-Top Outriggers Spreads trolling baits wide for offshore trolling presentations.

LED Spreader Lights for T-Top High-output LED spreader lights for night fishing, night navigation, and dock work.

Isinglass for T-Top Clear vinyl side curtains that enclose the T-top and protect against spray, wind, and rain.

T-Bag Storage Storage bag that hangs from the T-top frame — keeps life jackets, lines, and extra gear off the deck.

Baitwell (0)

30-Gallon Fiberglass Deluxe Baitwell with Pump Ideal for inshore and nearshore applications with a moderate live-bait requirement.

40-Gallon Fiberglass Deluxe Baitwell with Pump Larger capacity for offshore trips, heavy bait loads, and charter operations running multiple lines.

Seating & Cushions (0)

2-Piece 2" Foam Cast-Deck Bow Pad Split bow pad — easier to remove and store, and works around center-mounted cleats or hatches.

1-Piece 2" Foam Cast-Deck Bow Pad Full-coverage single bow pad for a clean, seamless look across the casting deck.

Bow Lounge Two swivel seats with bases and a normal-size cast deck. Available on W-22 through W-33 models only.

Backrest Pad for Tall Console Padded backrest mounted to the rear of the console for helmsman comfort on long runs.

Custom Cooler Cushions Marine-grade cushions fitted to your cooler top — doubles as seating without sacrificing fish storage.

65-Quart Ice Chest with Custom Cushion Heavy-duty 65-qt cooler with a custom-fitted cushion top — keeps fish cold and serves as a passenger seat.

Ice Chest Tie Downs Secure mounting straps that keep the ice chest in place underway.

Splashwell Seat Cushion Cushion fitted to the splashwell for extra seating at the transom.

Splashwell Back Rest Pad Padded backrest for splashwell seating — more comfort when running or sitting aft.

Leaning Post Accessories (0)

Lean Post Foot Rest Stainless tube foot rest that allows the helmsman to lean comfortably against the backrest without putting weight on their feet.

Leaning Post Cover Fitted cover that protects the leaning post and pads when the boat is stored or on the trailer.

Console Accessories (0)

Stainless Steering Wheel with Spinner Knob Polished 316 stainless wheel with a spinner knob for single-handed helm control.

Hydraulic Steering Hydraulic steering upgrade available on every hull — smoother helm feel, especially with larger outboards.

Console Flap Covers the helm opening when the boat is stored or unattended — protects electronics and keeps weather out.

Console Cover Fitted cover that protects the console, gauges, and helm when the boat is stored or on the trailer.

Console Shelf Additional shelf on the console for phones, binoculars, and small gear within reach of the helm.

12-Volt Accessory Plug on Dash Flush-mount 12V power outlet on the dash for charging devices and powering accessories.

6-Position Switch Panel Upgrade Expanded illuminated switch panel — adds more switched circuits for T-tops, livewells, lights, and accessories.

Battery Switch Allows the operator to select between battery banks or isolate batteries for storage.

Ritchie Compass Marine compass mounted at the helm for a backup heading reference independent of electronics.

Labor on Base Electronics For base electronics only. Additional electronics are supplied by the customer. Labor is $90/hour.

Marine Stereo with Speakers Waterproof marine-grade stereo with flush-mount cockpit speakers.

VHF Radio Fixed-mount VHF marine radio for communication and emergency DSC distress calling.

1" LED Courtesy Lights Recessed LED courtesy lights for cockpit illumination — ideal for pre-dawn departures and night returns.

Windscreen Console-mounted windscreen for helm protection from spray and wind at speed.

316 Stainless Grab Bar Around Windscreen Polished stainless grab bar mounted around the windscreen perimeter — provides a secure handhold for crew underway.

Additional Options (0)

Minn Kota i-Pilot Trolling Motor GPS-anchor trolling motor with spot-lock and autopilot functions — stays on position automatically so you can focus on fishing.

Underwater Lights LED underwater lights for night fishing — attract bait and gamefish around the hull after dark.

Raw-Water Washdown Deck-mounted raw-water washdown pump and hose for cleaning fish, rinsing gear, and flushing the cockpit.

Second Battery Additional marine battery — isolates house loads from the start battery and extends accessory runtime.

#8 Danforth Anchor with 15' Chain and 200' Rope No. 8 Danforth-style anchor with 15 feet of chain and 200 feet of rope — ready to set from the bow.

Roll-Lock Rod Holder with Base Plate Adjustable-angle rod holder that locks in any position — works for trolling, soaking bait, or storing rods securely underway.

3-Step Dive Ladder Stainless fold-down transom dive ladder — wide, non-slip steps make re-boarding from the water easy for divers in full gear.

Fuel Filter Inline fuel/water separator filter — protects the outboard from water contamination and debris in the fuel supply.

Outboard Motor Lock Stainless anti-theft lock for the outboard — secures the motor to the transom bracket when stored at docks or unattended.

Scuba Tank Track with Adjustable Tank Holders Stainless deck track system with adjustable holders for securing scuba tanks safely during transport.

Custom-Made Single-Axle Trailer Custom-built single-axle bunk trailer sized to fit your hull — galvanized for saltwater use.

Tandem Axle Trailer Custom-built tandem-axle bunk trailer sized to fit your hull — extra support for larger pangas and longer tows.

Spare Tire & Mount for Trailer Matching spare tire with a mount on the trailer — so a roadside flat does not end the trip.

Manual Power-Pole Manual shallow-water anchor that spikes into the bottom to hold position on the flats without a trolling motor.

Power-Pole Electric shallow-water anchor — deploy and retract from the helm to hold position quietly in skinny water.

Bow Rail Stainless bow rail that runs around the forward deck perimeter — adds safety for bow riders and provides a handhold when anchoring.

Request a Quote

Review the ticket first, then add your details so the shop can reply — usually within one business day.

Hull preview

Lock a hull in Step 1 and it will sit here like it does on the shop floor.

W-16

The Lightweight Backwater Skiff

Standard Rail

15.96′

LOA

9.9–25 single

Engine

992

Cap.

W-22

The All-Around Coastal Workhorse

Standard Rail

21.98′

LOA

40–75 single

Engine

2,425

Cap.

W-22 B/A

High-Rail Inshore Performer

High Rail

22.11′

LOA

40–75 single

Engine

2,425

Cap.

W-25

The Offshore-Ready Fishing Platform

Standard Rail

25.08′

LOA

60–115 single

Engine

2,646

Cap.

W-25 B/A

High-Speed Offshore Panga

High Rail

25.13′

LOA

60–115 single

Engine

2,646

Cap.

W-267 B/A

The Wide-Body Twin-Engine Panga

High Rail

26.04′

LOA

100–200 / 40–90 twin

Engine

3,181

Cap.

W-29

The Commercial-Grade Offshore Panga

Standard Rail

28.87′

LOA

115–250 / 90–250 twin

Engine

5,511

Cap.

W-33

The Largest Deep-Sea Panga

Standard Rail

32.71′

LOA

115–250 / 115–300 twin

Engine

6,615

Cap.

Build summary

Included standard packages

› Navigation Package
› Console Package
› Gauge Package
› Rigging Package
› Floor Package

Included standard equipment

› Leaning Post
› Swing Down Step
› Backrest

Your contact details

First Name *

Last Name *

Email *

Phone

Primary Use

Ideal Purchase Timeframe

Additional Notes